The material and process information described in this web site is used for internal reference in the Biomimetic Robotics group at Stanford University. It also provides general suggestions in material system design and selection for researchers who are interested in applying SDM process for robot fabrication. However the information posted here only represents our preference. It does not represent nor replace any standard testing results. Stanford University is not responsible for any problems caused by following the material selection recipes discussed in this web site. Most of material property data are from individual suppliers. Some material property information is collected according to experience of researchers at Rapid Prototyping Lab and the Biomimetic Robotics Project at Stanford University.
 
 

Back to Material Home         SDM Tutorial              Biomimetic Robotics Home               CDR Home                Stanford University

Last updated: 11/22/1999