Sample Wire Routing Service

This service enables you to perform basic wire routing using a Web interface. To start, page to the botton and press the "GO!" button. This will start a program that will show you the sample environment that is defined by the box coordinates from this page. You can adjust the environment by changing the coordinates of the boxes. Next, change the "Select Operation" value from "1. View Environment Only" to "1. View Environment w/Routing" and press the "GO!" button. This will route the wires defined on this page in the free space.

Routing Environment

Number of Obstacle Boxes
Box Coordinates(x1 y1 z1 x2 y2 z2):
20.0 100.0 0.0 50.0 120.0 10.0 50.0 30.0 0.0 120.0 50.0 10.0 100.0 70.0 0.0 120.0 120.0 20.0 30.0 70.0 0.0 50.0 80.0 10.0 20.0 20.0 0.0 30.0 50.0 10.0 70.0 80.0 0.0 80.0 90.0 20.0 12.0 10.0 0.0 30.0 30.0 10.0 12.0 50.0 0.0 30.0 70.0 10.0 12.0 90.0 0.0 30.0 110.0 20.0 12.0 130.0 0.0 80.0 140.0 10.0 80.0 110.0 0.0 90.0 120.0 10.0 110.0 120.0 0.0 130.0 130.0 10.0 110.0 50.0 0.0 130.0 70.0 10.0 110.0 10.0 0.0 130.0 30.0 10.0 >
Global Bounding Box(x1 y1 z1 x2 y2 z2):
0.0 0.0 0.0 150.0 150.0 25.0>

Routing Resolution:

Ports

Number of Harness Ports
Port Coordinates(x y z): 100 10 5 10 50 5 50 140 5 140 100 5 140 10 5 100 100 5 100 20 5 100 140 5 50 100 5 10 140 5 >

Wires
Number of Conductors
From Port, To Port, Radius: 1 2 3.0 1 3 3.0 1 4 3.0 1 5 3.0 1 6 3.0 2 3 3.0 2 4 3.0 2 5 3.0 2 6 3.0 3 4 3.0 3 6 3.0 4 5 3.0 4 6 3.0 5 6 3.0 >

Select Operation:

Sample Wire Routing Service

Routing Environment

Ports

Wires

Select Operation: 1. View Environment Only 2. View Environment w/ Routing

Select Operation: